| ||
The Ovation Fan Club | ||
| ||
Random quote: "Ovation Guitars really don't get the respect they deserve!" - Alex Pepiak |
SBB Elite '84 Collector's Edition problem
| View previous thread :: View next thread | |
Members Forums -> About my guitar... | Message format |
muso.greg |
| ||
Joined: September 2013 Posts: 52 Location: Brisbane Australia | I was recently fortunate to purchase this lovely instrument that I simply had to play from the moment I saw the photo. I didn't know they existed until recently! It was purchased in the USA and was shipped 1/3 of the way around the world to "down under". I played it acoustically very happily for the first couple of days. I am not much of an acoustic player and generally stay in the realm of electric guitars (mostly solid bodies) but I found this a particularly nice guitar to play acoustically. I thought I would use it for a gig I had coming up, so I plugged it in to see what it sounded like amplified.... my first issue with it No output. nothing! Problem I have no reason to think it wasn't working when it left the USA (I'm sure it was) so I looked for a loose wire - nothing. I found the battery compartment. I had to look up the online instructions to figure out how to get at it and check the battery - all good there. Battery is 90% charged (but I tried a new battery just in case - no different). I unplugged the piezo output and put a multi-meter on it - I can get a reading so I assume it is working. So I am turning to the knowledgeable people here to tell me what have I missed? What else can I check? Do the pre-amps just die? I've tried different leads, plugged into different amps and PAs... Suggestions at this point are very welcome. There is no easy option for a repair centre near where I am, so if I you can help me to diagnose the issue (and hopefully fix it) I will be a very happy guitarist | ||
Damon67 |
| ||
Joined: December 2006 Posts: 6994 Location: Jet City | Hey folks, this was my 84, and it was indeed working when it left. I have another preamp somewhere I can dig up and send worse case, but if anyone has some other ideas, please chime in. Thanks | ||
Cavalier |
| ||
Joined: March 2013 Posts: 359 Location: undisclosed | He should be able to see if the battery power is getting to the preamp with a ohm meter. I'd suspect the output jack first but cleaner in the controls isn't hard to try. | ||
muso.greg |
| ||
Joined: September 2013 Posts: 52 Location: Brisbane Australia | I get a reading of 1.6nf at the jack from the pickup. If I plug the pickup jack into the pre-amp and put the multi meter across the output jack I get a reading of .07nf which goes up to .25nf if I disconnect the battery. I had already tried jumping the output jack - no signal still. The battery power is getting to the preamp - I'm not sure what to test after that. I guess I need a schematic? | ||
TAFKAR |
| ||
Joined: April 2008 Posts: 2985 Location: Sydney, Australia | Drive up to Muzz's house with a nice bottle of wine. | ||
muso.greg |
| ||
Joined: September 2013 Posts: 52 Location: Brisbane Australia | is that an hour... a day... or just wishful thinking? | ||
TAFKAR |
| ||
Joined: April 2008 Posts: 2985 Location: Sydney, Australia | Until it's fixed. Better take a designated driver with you. Edited by TAFKAR 2015-07-14 2:56 AM | ||
Damon67 |
| ||
Joined: December 2006 Posts: 6994 Location: Jet City | Greg might be wondering how far Muzza's place is. I hear that there's a bit of space between things down under. Greg, I'll help how ever I can. I am pretty sure I have parts for anything that could be wrong, I just need you to find where the problem is. | ||
muso.greg |
| ||
Joined: September 2013 Posts: 52 Location: Brisbane Australia | Thanks Damon. I'm just concerned that I have done something wrong that is really simple (if you know what you are doing!). It wouldn't be the first time... I don't know Muzza other than what I posted on the forum - so I have no idea who he is or where he lives. I like that he likes wine | ||
Eynowd |
| ||
Joined: July 2014 Posts: 154 Location: Canberra, Australia | muso.greg - 2015-07-19 11:37 AM I don't know Muzza other than what I posted on the forum - so I have no idea who he is or where he lives. I like that he likes wine Muzz lives on the Sunshine Coast, so about an hour or so from you, depending on where in Brisbane you are. If you go to the Downunderers forum, he was the last one to make a post there. The Wiz, who used to frequent these forums, and now runs the Australian Guitar Making School in western Brisbane, might also be able to help. | ||
muso.greg |
| ||
Joined: September 2013 Posts: 52 Location: Brisbane Australia | Thanks | ||
Damon67 |
| ||
Joined: December 2006 Posts: 6994 Location: Jet City | Greg, my white SSB stopped working. Thought it might be the preamp, but as Cavalier said above found out it was the output jack that was the culprit. I did find my spare FET preamp too, but I have a sneaky suspicion that's not the issue. | ||
TAFKAR |
| ||
Joined: April 2008 Posts: 2985 Location: Sydney, Australia | Muzz is an electrician by trade, so if you grease him with alcohol (doesn't like beer) I'm sure he'll be most helpful. Send him a PM through here or PM me your details, and I'll text him with your details. | ||
muso.greg |
| ||
Joined: September 2013 Posts: 52 Location: Brisbane Australia | My work is taking me overseas in the next few days so I made an executive decision and dropped it into Ocheteco Guitars and asked Gabriel to look at it and work out the issue. I am only home for a few weeks and time has just about run out! Gabriel is someone I trust for that sort of thing, but being as busy as he is I will have to get the wife to collect it once he has had the chance to look at it. At least it should be ready to play when I get back | ||
MWoody |
| ||
Joined: December 2003 Posts: 13987 Location: Upper Left USA | Electronics repair is the art and science of systematically touching every part until the most expensive or hardest to reach part has been replaced and you eventually find that the battery was dead... just saying. I have a variety of preamp parts... somewhere... if needed. Edited by MWoody 2015-07-22 8:05 AM | ||
muso.greg |
| ||
Joined: September 2013 Posts: 52 Location: Brisbane Australia | Thanks. You describe my methodology well - pick an end of the circuit and proceed slowly and with care Of course sometimes I have picked the "wrong" end to start... | ||
Jump to page : 1 Now viewing page 1 [25 messages per page] |
Search this forum Printer friendly version E-mail a link to this thread |
This message board and website is not sponsored or affiliated with Ovation® Guitars in any way. | |
(Delete all cookies set by this site) | |