The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "I've always felt that blues, rock 'n' roll and country are just about a beat apart."-Waylon Jennings



Jump to page : 1
Now viewing page 1 [25 messages per page]
How do I clean a Satin Finish?

View previous thread :: View next thread
   Members Forums -> General PostingMessage format
 
Old Man Arthur
Posted 2011-07-12 7:10 PM (#350304)
Subject: How do I clean a Satin Finish?



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR
So I got myself a 2005 S771-4...
It has had a rough life.
Well... I actually has been stored for most of it's life, in a Less-than-Sterile environment.
I just cleaned-it-up with a damp rag, so I got most of the crud off of the top.
I also oiled the fingerboard and got the rusty strings off of there.
(I got a corroded spot on one of the frets, but that is another thread)

Anyway... What is best to use to clean and maintain a Satin Finish?
(or is a damp rag about as Good as it Gets?)

Meanwhile... Time to Brag!
All cleaned-up...


Oh, and this thing has unusually low action... Even with two shims under the saddle.
And it sounds nice. I had one with an OP-24+ before... This has an OP30, so I get a Tuna.
Top of the page Bottom of the page
moody, p.i.
Posted 2011-07-12 7:31 PM (#350305 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?


Joined:
March 2002
Posts: 15665

Location: SoCal
Pledge.....
Top of the page Bottom of the page
scott lamperd
Posted 2011-07-12 7:45 PM (#350306 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?


Joined:
November 2004
Posts: 367

Location: Eaton, Indiana
I use glass plus on all of my O's. It works well and doesn't leave a film.
Also, I use magic eraser to clean fretboards. It's intended for floors and such but really does a nice job and is non-abrasive.

scott lamperd b c (before computers)
Top of the page Bottom of the page
Darkbar
Posted 2011-07-12 8:42 PM (#350307 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?



Joined:
January 2009
Posts: 4535

Location: Flahdaw
Better question....how do you clean those window treatments?
Top of the page Bottom of the page
Old Man Arthur
Posted 2011-07-12 8:50 PM (#350308 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR
dark bar asks:
Better question....how do you clean those window treatments?
Those are aluminized plastic Emergency Blankets... Y'know? by Coleman.

They keep the afternoon sun from baking my room.
I can see through them during the day, like mirror shades, but they reflect the camera flash.
I will take them down in the Fall, after the Equinox.
Top of the page Bottom of the page
an4340
Posted 2011-07-12 11:20 PM (#350309 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?


Joined:
May 2003
Posts: 4389

Location: Capital District, NY, USA Minor Outlying Islands
besides the foregoing pledge etc according to Dan Erilwine's guitar player handbook, he uses saliva. I've used it and it's a pretty good solvent ... but if you use it, clean up afterwards with something like dunlop 65.
Top of the page Bottom of the page
FlySig
Posted 2011-07-13 9:03 AM (#350310 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?



Joined:
October 2005
Posts: 4049

Location: Utah
I'd use a soapy dish cloth, with very little soap, followed by several wipes with a damp rag to get all the soap off. I would not put anything on it to protect it.

Dunlop 65 works well too.
Top of the page Bottom of the page
moody, p.i.
Posted 2011-07-13 9:16 AM (#350311 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?


Joined:
March 2002
Posts: 15665

Location: SoCal
Originally posted by an4340:
besides the foregoing pledge etc according to Dan Erilwine's guitar player handbook, he uses saliva. I've used it and it's a pretty good solvent ... but if you use it, clean up afterwards with something like dunlop 65.
Spit polish??

You guys way over think this. Just use lemon Pledge. Guitar looks and smells wonderful....
Top of the page Bottom of the page
ProfessorBB
Posted 2011-07-13 4:04 PM (#350312 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?



Joined:
January 2006
Posts: 5881

Location: Colorado Rocky Mountains
Dunlop 65, and less effort than for glossy finishes.
Top of the page Bottom of the page
Old Man Arthur
Posted 2011-07-13 5:20 PM (#350313 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR
Y'see? Therein lies the problem.
Before, when I had another S771, I just used a damp cloth.

But when I read about Pledge, and other such cleaners, I am NOT trying to make it shiny.
Actually I want it to stay "Satin" and maybe remove that shiny spot below the strings where people have rested their pinky finger.
Top of the page Bottom of the page
Darkbar
Posted 2011-07-13 6:20 PM (#350314 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?



Joined:
January 2009
Posts: 4535

Location: Flahdaw
Originally posted by Old Man Arthur:
where people have rested their pinky finger.
Keep your damn, greasy pinky OFF the guitar!
Top of the page Bottom of the page
an4340
Posted 2011-07-13 8:10 PM (#350315 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?


Joined:
May 2003
Posts: 4389

Location: Capital District, NY, USA Minor Outlying Islands
very problematic to remove shiny spots on a satin guitar due to the fact that the spot has simply been worn into a gloss finish. I have a mutant les paul (actually a tacoma electric papoose, which as far as I know will never be made again by that company that bought tacoma, which is a shame, but I digress ...) that was a satin finish, had some gloss spots, I buffed it out with some car stuff, forget what it was and made the whole thing gloss. Once you start rubbing to gloss, there's no going back. I think you're best bet is just to clean it with the dunlop 65, and leave the shiny spot as character.
Top of the page Bottom of the page
Old Man Arthur
Posted 2011-07-13 9:52 PM (#350316 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR
Character! Love it.

I was told that this guitar has very little play-time, but it has wear-spots in the frets. But really, I like it.
Has it few marks here-n-there, but it gives it Character! (like you said)
It has apparently been stored for a while. But I took it out today, and I could hear it 'open-up' again due to about two hours of playing. And it sounds NICE. Acoustically and plugged-in. I have always liked sound of an A-Braced Balladeer Special. So I will be taking this one out often.

I am more concerned with NOT making any more Shiny spots. :p
Top of the page Bottom of the page
BrickGlass
Posted 2011-07-14 2:48 AM (#350317 - in reply to #350304)
Subject: Re: How do I clean a Satin Finish?


Joined:
June 2011
Posts: 50

Location: Utah
Dunlop 65. Best guitar polish, hands down. I use 100% lemon oil on most fretboards. I love the Old English brand of lemon oil.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclubâ„¢ Copyright (c) 2001
free counters
(Delete all cookies set by this site)