|
|
Joined:
December 2004
Posts: 12
Location: Boston USA | I have a 1968 model 1115 that's in dire need of new pair of 6-on-a-side tuning machines. I bought an aftermarket set from GC but they are a bit too long -- the tuners are just too long for the slot holes.
Can anyone recommend a source for a new set? StewMac doesn't carry them. I'm not looking for original, just functional. Alternatively, would Ovation have them?
Thanks for your help
Mike |
|
| |
|
Joined:
December 2001
Posts: 10583
Location: NJ | I have the schaller ones branded with the ovation logo
I think that you should have the klusons but the schallers should work
e or call me after the namm show like next tues |
|
| |
|
Joined:
December 2004
Posts: 12
Location: Boston USA | Will do. I did some measuring and the spacing I need is 15/16" from center of post to center of post. The new ones are just over 1 inch center to center. Mike |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | Get a Vintage Guitar Magazine. In there are some guys who specialize in parts. It's a possible source. |
|
| |
WTB: Tuning Machines for 1968 12-String
