The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "Got time to breathe, got time for music." --Briscoe Darling.



Jump to page : 1
Now viewing page 1 [25 messages per page]
End pin and bone bridge pins, fits Martins (others?)

View previous thread :: View next thread
   The Ovation Fan Club -> For SaleMessage format
 
Patch
Posted 2010-02-19 2:52 PM (#282978)
Subject: End pin and bone bridge pins, fits Martins (others?)



Joined:
May 2006
Posts: 4227

Location: Steeler Nation, Hudson Valley Contingent		Here are a couple of leftovers, but EXTREMELY nice leftovers, from the upgrades I did to my Martin D-42. I may never need them, so I decided to let them go.

The end pin came installed in the guitar and was removed to install pre-amp a jackpin. Ther isn't a thing wrong with it. I believe it to be bone and it has an abalone dot.

I ordered the bridge pins from Bob Colosi on the AGF, the same place I got my fossilized walrus ivory saddle. To be honest, I forgot to put them in when I strung the guitar back up, and I like the sound of the instrument just fine the way it is. In other words, if it ain't broke, don't muck around with it. (Unless you're really, really bored of course.)

So these pins are brand new, never-been-used. Solid bone with abalone dots and the very detailed instruction sheet Bob sent. I took one picture without a flash and another with the flash to show how the abalone pops when the light catches it.

I'm not a through-and-through wood-boxer, so I don't know how these will fit other brands, but they are very nice quality pieces. I'll send'em to you in the continental US for $40.

ALSO, though I don't have pictures, I have three lightly used DAMPIT humidifiers in three different sizes, "guitar", "super guitar", and "violin". Here's a link to the descriptions:

DAMPITS

They are all in excellent condition but only one has the humidity board with it. I've found that the violin size fits perfectly in some of the smaller epaulette holes of Ovation mandolins.

I'll ship all of them for $35.

Let me know what you think.





Top of the page Bottom of the page
Gallerinski
Posted 2010-02-19 3:21 PM (#282979 - in reply to #282978)
Subject: Re: End pin and bone bridge pins, fits Martins (others?)
Joined:
May 2008
Posts: 4996

Location: Phoenix AZ		I'll take the pins
Top of the page Bottom of the page
Patch
Posted 2010-02-19 3:43 PM (#282980 - in reply to #282978)
Subject: Re: End pin and bone bridge pins, fits Martins (others?)



Joined:
May 2006
Posts: 4227

Location: Steeler Nation, Hudson Valley Contingent		Pins are gone then.

Humidifiers still available.
Top of the page Bottom of the page
2ifbyC
Posted 2010-02-19 3:49 PM (#282981 - in reply to #282978)
Subject: Re: End pin and bone bridge pins, fits Martins (others?)
Joined:
December 2006
Posts: 6268

Location: Florida Central Gulf Coast		Patch,

I'll take the humies if not spoken for...
Top of the page Bottom of the page
Patch
Posted 2010-02-19 4:00 PM (#282982 - in reply to #282978)
Subject: Re: End pin and bone bridge pins, fits Martins (others?)



Joined:
May 2006
Posts: 4227

Location: Steeler Nation, Hudson Valley Contingent		Thanks Johnny.

That's all for now folks.

Dave an Johnny, I've replaced my old computer so I no longer have your old emails with your addresses. Can you both send them in a PM?

I'll ship everything on Monday as it's all split between my office and my home.

(Geez, I wish every "For Sale" ended like this. SOLD in less than an hour with no dickering at all! Cool.) :cool:
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclub™ Copyright (c) 2001
free counters
(Delete all cookies set by this site)