|
|
Joined:
July 2006
Posts: 149
Location: gods country..west virginia | does any one have any info on the aluminum fingerboard ovations from the 70's?? |
|
| |
|
Joined:
February 2002
Posts: 5750
Location: Scotland | Do a search in the archives and current threads using the terms Matrix, Medallion, Ultra and Special Balladeer. You could also searching on Urelite or Foam Neck. These guitars have been discussed a lot and there's a ton of information here.
The short answer is if you can find one in decent shape and it's very cheap it's probably worth a go. If not leave well alone. |
|
| |
|
Joined:
July 2006
Posts: 149
Location: gods country..west virginia | i picked one up,neck is super straight,action is low.i got it for 96$ thanks paul..jason |
|
| |
|
Joined:
March 2005
Posts: 12759
Location: Boise, Idaho | As long as the frets are in good shape, you did fine. The theory was that the neck would be replaced for the cost of a refret job, but the idea never caught on and the necks aren't available. Mine is still in almost new shape because it was played very little, but they are a good working guitar. |
|
| |
|
Joined:
July 2006
Posts: 149
Location: gods country..west virginia | thanks mark |
|
| |
|
Joined:
July 2006
Posts: 149
Location: gods country..west virginia | i was wondering if there are any other ovation necks that will fit the matrix bodies?? |
|
| |
info on aluminum fingerboard ''o'' neeeded
