|
|
Joined:
January 2003
Posts: 4
Location: cali | I recently bought a Magnum 1 on Ebay.The two bridge post screws dont fit in the intended bridge holes.I cant anchor or bring the bridge down into the body cavity where it needs to sit anybody know where I can find the correct screws? as I dont think these ones are not the originals also is it normal for only the neck pick up to work when using the stereo jack? |
|
| |
|
Joined:
February 2002
Posts: 5750
Location: Scotland | The stereo socket is designed to be used with a "Y" cord, TRS to 2 mono jacks. The tip carries the neck pickup signal & the ring carries the bridge. A studio insert cord will do the job.
THe bridge posts appear to be the same as used on the guitars (non-Schaller bridges) the factory may have some or some members of the board. |
|
| |
|
Joined:
January 2002
Posts: 970
Location: Atlanta,Ga. | I have a few magnum parts floating around here somewhere(if i could only find them).Email me and i will look this evening ....samova@aol.com |
|
| |
MAGNUM 1 PARTS
