|
|
Joined:
January 2003
Posts: 1498
Location: San Bernardino, California | Added some schematics to the gallery.
I need the values for the hybrid (H1) for this one:
http://www.ovationfanclub.com/photos/BruDev_63029_c-2.jpg
and H1 for this one:
http://www.ovationfanclub.com/photos/BruDev_63084_c-3.jpg
The value for L1 on this one:
http://www.ovationfanclub.com/photos/BruDev_63139_d.jpg
The value for T1 for this one:
http://www.ovationfanclub.com/photos/BruDev_63183_e.jpg
and T1 for this one:
http://www.ovationfanclub.com/photos/BruDev_63233_f.jpg |
|
| |
|
Joined:
December 2003
Posts: 13997
Location: Upper Left USA | Thanks BD.
I am learning the benefits of reading the directions before taking things apart. |
|
| |
|
Joined:
January 2004
Posts: 648
Location: Florida | I dont know the actual value, but experiencial shooting from the hip suggests a value of about 1.5 to 5 henries for L1 in the 3rd example. Much less than 1 Henry would be ineffectie, more than a few Henries would be pretty big. The overall value of the cap and resistor with it would also suggest that value range. |
|
| |
|
Joined:
January 2003
Posts: 1498
Location: San Bernardino, California | I got out the calculator and dug up the formula for resonance. Using the value of 800Hz (as per the Breadwinner user manual), I came up with the value of 1.5 henry for L1. |
|
| |
|
Joined:
January 2004
Posts: 648
Location: Florida | Nice guess then. |
|
| |
|
Joined:
January 2004
Posts: 648
Location: Florida | BTW, if you're creating that ... it might be a good thing to use two smaller inductors, back to back in series. |
|
| |
Electric Schematics
