|
|
Joined:
August 2004
Posts: 604
Location: Tampa, FL | I'm trying to help Glenn Hess out with this Deacon. I've found that half of his tone pot is dead. This is a dual stacked 250 Kohm potentiometer. Anybody know where I can find one of these? It's going need to be pretty specific as afr as form factor goes so I kind of need adn 'exact' part. Can anyone help me out here? If I can get this part, I believe this patient can be released back into the wild.
Thanks all
Mr. Bigger-the-gob Woddy now that's another story... a little longer to tell. |
|
| |
|
Joined:
January 2003
Posts: 1498
Location: San Bernardino, California | Usually the 750K section is linear and the 250K section is log. NOTE the values! |
|
| |
|
Joined:
August 2004
Posts: 604
Location: Tampa, FL | I didn't look at the physical part itself. I was going by the schematic MWoody provided me. I was wondering about the values. The 250K was pretty clear on the copy the 750K had the Xerox optical edit thing going on so it looked like /50K. I assumed (always dangerous) it was a 2.
Thanks BruDev, that'll keep me out of a little trouble here. |
|
| |
|
Joined:
November 2004
Posts: 1374
| BruDev has the most complete info on these boards I've been able to find.. there are 4 different revisions w/schematics and values of components etc in his gallery....
Thanks Again Rick. And thanks to all here for the help and wealth of knowledge and info here.
God Bless,
Glenn |
|
| |
|
Joined:
December 2003
Posts: 13986
Location: Upper Left USA | Probably runs through a MIL SPEC or other unclassified drawing :rolleyes:
The parts can also be found on Vietnam era helicopters! |
|
| |
I need some Deacon help here