Adamas 2 buzzing
Krumkev
Posted 2019-03-31 12:57 PM (#547523)
Subject: Adamas 2 buzzing




Joined:
March 2019
Posts: 3


Hi. My Adamas has just started to buzz big time. It’s not fret buzz and I have squeezed and probed all the obvious sources. I am about to remove all the electrics to eliminate that. I am hoping the Kaman bar is not at fault as there are no markers that could be removed to access it. Maybe a brace, but I have pressed them all in turn. I have tried everything else and I’m getting desperate. Any ideas or tests welcome.
Top of the page Bottom of the page
Mr. Ovation
Posted 2019-03-31 2:29 PM (#547525 - in reply to #547523)
Subject: Re: Adamas 2 buzzing




Joined:
December 2001
Posts: 7130


Location: The Great Pacific Northwest
A stethoscope (like they sell for working on cars even) comes in handy. It could be a brace under the top came loose.
Top of the page Bottom of the page
Krumkev
Posted 2019-04-01 3:45 AM (#547526 - in reply to #547523)
Subject: Re: Adamas 2 buzzing




Joined:
March 2019
Posts: 3


Thanks for that. The stethoscope is an excellent idea. I used that once in my youth when looking for corona in an X-ray machine. My colleagues thought I had lost it. I also used it when balancing twin carbs on a Rover 75. Don’t know why I never thought of it.
The loose brace is a good possibility as I recently moved and was forced by circumstance to consign the Adamas to a mover with a plea to take care. Still, mebbe they dropped it.
Thanks again for the reply.
Kev
Top of the page Bottom of the page
alpep
Posted 2019-04-01 4:20 PM (#547528 - in reply to #547523)
Subject: Re: Adamas 2 buzzing




Joined:
December 2001
Posts: 10547


Location: NJ
loose brace sounds right
Top of the page Bottom of the page