Black goo for the neck joint
ksdaddy
Posted 2017-03-30 6:20 PM (#533461)
Subject: Black goo for the neck joint


Joined:
April 2003
Posts: 608

Location: Caribou, ME		I'm in the middle of re-necking a bowl....Ovation used something to make the neck joint (where it meets the fiberglass) a lot smoother. I know Allison used to talk about a black goo she called monkey dung or similar on the Applauses. I've actually used black silicone caulking with mediocre results.

Any suggestions?
Top of the page Bottom of the page
seesquare
Posted 2017-03-31 7:39 AM (#533471 - in reply to #533461)
Subject: Re: Black goo for the neck joint


Joined:
November 2002
Posts: 3611

Location: Pacific Northwest Inland Empire		FWIW, J-B Weld is kinda dark gray. The monkey poo was probably some kind of quick-set epoxy. As to where you would source it......best-of-luck. :-)
Top of the page Bottom of the page
DanSavage
Posted 2017-03-31 8:45 AM (#533472 - in reply to #533461)
Subject: RE: Black goo for the neck joint



Joined:
June 2012
Posts: 2316

Location: Pueblo West, CO

Go to McMaster-Carr using the following link:

https://www.mcmaster.com/#high-strength-adhesives/=16zs2l1

Then, click on the color: black icon you'll see all kinds of epoxies that come in black. Most are quick-set.

Keep in mind that if you buy the cartridge-style, you'll need the dispensing gun. You'll only need the mixing nozzles if you're planning to lay down a long line of glue, such as when you're gluing a top to a bowl.

Top of the page Bottom of the page