Crackling output jack, Elite 1778T

alphasports Posted 2016-09-21 2:03 PM (#528937) Subject: Crackling output jack, Elite 1778T Joined: December 2014 Posts: 4 Location: Montreal CAN Hi all, I have a very nasty, regular crackling/popping going on with my output jack, including the output shutting off completely (only sporadically...can see signal on the mixing board but almost inaudible output). Can it be fixed with a re-solder of the existing jack, or should it be replaced, and with what (recommendations) ? Thanks! Old Man Arthur Posted 2016-09-21 4:48 PM (#528941 - in reply to #528937) Subject: Re: Crackling output jack, Elite 1778T Joined: September 2006 Posts: 10777 Location: Keepin' It Weird in Portland, OR The jack cable plugs into the "Can" or the housing of the Preamp. If you can find a jack with a compatible plug for the housing it would be a simple swap. I think that it is a 3.5mm plug. You could contact Ovation. http://www.ovationguitars.com/contact I know Nothing about soldering except that I am not good at it.