Adamas fretboard?
Monttexan
Posted 2013-01-10 4:16 PM (#464114)
Subject: Adamas fretboard?


Joined:
January 2012
Posts: 53

Location: NW Montucky
So, my new toy arrived yesterday. An Adamas 1897 courtesy of a lucky bid on E-bay. I'll post some photos once I get it cleaned up which brings me to the reason for this post. I need to clean grod from along the frets which is no big deal. I seem to recall reading somewhere (not sure if on here or in the Ovation history book) that Adamas fretboards are treated somehow? I don't remember for sure what is was, I just remember a reference that they are different somehow. Should I oil the fretboard once I've cleaned it, or leave it alone? Thanks in advance!
Top of the page Bottom of the page
TAFKAR
Posted 2013-01-10 4:36 PM (#464118 - in reply to #464114)
Subject: Re: Adamas fretboard?



Joined:
April 2008
Posts: 2985

Location: Sydney, Australia
The walnut fretboards have resin in the wood, through some sort of pressure system. I think (waiting to be corrected) that they don't need oiling - but it doesn't hurt anyway, as any oil that won't seep in gets wiped off at the end.
Top of the page Bottom of the page
DanSavage
Posted 2013-01-10 5:19 PM (#464122 - in reply to #464114)
Subject: RE: Adamas fretboard?



Joined:
June 2012
Posts: 2303

Location: Lake Forest, CA

They're resin impregnated using acrylic resin.

This is usually done using a vacuum system or under pressure in an autoclave. Not sure which method Ovation used.

Oiling resin impregnated wood won't really do anything because the pores of the wood are complete sealed, inside and out.

 

 



Edited by DanSavage 2013-01-10 5:41 PM
Top of the page Bottom of the page
bburg
Posted 2013-01-12 2:09 PM (#464191 - in reply to #464114)
Subject: Re: Adamas fretboard?



Joined:
August 2009
Posts: 1137

Location: Germany, where delicious wine is growing (Rheinh)
Hmmmm..... I think the 1897 is a SMT Adamas and has an ebony fretboard.....I only know that the walnut is impregnated. Ebony also??

Bernie
Top of the page Bottom of the page
TAFKAR
Posted 2013-01-12 3:37 PM (#464194 - in reply to #464114)
Subject: Re: Adamas fretboard?



Joined:
April 2008
Posts: 2985

Location: Sydney, Australia
Ebony is not impregnated and should be oiled.
Top of the page Bottom of the page
Monttexan
Posted 2013-01-16 5:44 PM (#464310 - in reply to #464114)
Subject: Re: Adamas fretboard?


Joined:
January 2012
Posts: 53

Location: NW Montucky
Thank you all for your input. Yes, its an SMT, and the fretboard is very dark.....ebony makes sense. I oiled it.
Top of the page Bottom of the page