|
|
Joined:
December 2003
Posts: 13997
Location: Upper Left USA | Here is a one piece bridge with the posts. It is in great shape.
$100 including S&H to most normal addresses.
Will consider trades on any other cool parts. |
|
| |
|
Joined:
December 2003
Posts: 13997
Location: Upper Left USA | Let me also add to the list:
Seymour Duncan design (offshore manufacture) Humbuckers, like the 103's.
Shown here in an early version of a Mutt.
$45 including S&H&I. |
|
| |
|
Joined:
February 2003
Posts: 398
Location: Gig Harbor, Washington | Hmmmm...Zis iz Berrie Dempting...
Pear habz vee choood chat!?!
Chioow... :cool: |
|
| |
|
Joined:
December 2003
Posts: 13997
Location: Upper Left USA | (sound of bobber dipping slightly under once - cane pole set in lawn chair...) :cool: |
|
| |
|
Joined:
June 2007
Posts: 270
Location: Yorkshire, England | Hi Michael - Further to the message I sent you about tailpiece studs/posts for the Schaller bridge as above, my Les Paul tailpiece screws do fit, so, have ordered a set ! Thanks for your help, Regards, Clyde |
|
| |
|
Joined:
December 2007
Posts: 6
| Is this piece still available and will it fit a 1973-1975 deacon?
Fitz |
|
| |
|
Joined:
June 2007
Posts: 3084
Location: Brisbane Australia | PM sent |
|
| |
|
Joined:
December 2007
Posts: 6
| No PM received.
Try again.
Fitz |
|
| |
|
Joined:
December 2003
Posts: 13997
Location: Upper Left USA | Hmmmm.
I have lost track of this post so I'll try to update with what I know is available and add a modicum of semi-related items as well.
The Brass (Gold colored) Bridge is in the hands of Mr. Golf.
All of the solidbody stud mounts utilize a .500" 28 TPI socket for a .500" 28 TPI stud.
The stud spacing is 3 1/4", same as Gibson for the most part.
Newer manufacturers use the smaller diameter studs so you will need to plug and redrill or - as I have done twice - epoxy the smaller stud into the existing .500" spot.
I have used an adapter plate to mount a narrower Tune-o-matic bridge.
This allowed me to do a "string thru"!
The bridge posts for the one-piece are different than those of the Brass/Plastic ones.
I need to dig into the pile for Aussie James and see what I have in the shiny gold department.
www.stewmac.com
has schematics on all of what they sell. |
|
| |
|
Joined:
December 2007
Posts: 6
| Would like to find a drop in replacement for my deacon like the brass one Mr Golf now posesses or the chrome/gold saddle one on the lower picture.
Fitz |
|
| |
|
Joined:
December 2003
Posts: 13997
Location: Upper Left USA | Customer service has new ones - at the new price.
Used is hit or miss and seperate on Ebay go from $40-$90 depending on how many of the BFLG are on vacation.
I prefer the one piece over the Brass/Plastic by far. |
|
| |
|
Joined:
December 2007
Posts: 6
| I called stewmac customer service today. They did not have either of the schaller bridges shown above. I called ovation hoping to purchase a new one but they do not have any parts to support the deacon.
I am still looking for either the gold one or the chrome/brass shown above. If anyone can help please post.
Fitz |
|
| |
|
Joined:
December 2003
Posts: 13997
Location: Upper Left USA | Oh, Ovation/Hamer Customer service, John or Kim. |
|
| |
Gold Ovation Schaller one-piece Bridge