|
|
Joined:
October 2008
Posts: 7
Location: Calgary, Alberta, Canada | I'm looking to buy a replacement treble side tuner for an early Breadwinner after mine fell over , this is the tuner where the screws are opposite each other instead of offset to each other like the photos (hopefully it works), thanks in advance for any help
.
.
.
.
.
this is the tuner that I am looking for, the screws are directly opposite from esch other
.
.
.
.
.
.
.
.
this photo is of the tuner that I do not require, the screws are NOT directly opposite each other but "offset", however one of these may work without the need for drilling any new holes, I would be interested in one of these as well
 |
|
| |
|
Joined:
February 2002
Posts: 5750
Location: Scotland | They're Schaller M6N, the "N" stands for nylon housing. They're still in production but they changed to offset screwholes a long time ago. You might find a vintage Ovation-logo'd set on ebay if your lucky. |
|
| |
|
Joined:
December 2003
Posts: 13996
Location: Upper Left USA | Paul (PNR123) contacted me and I saw that his BW is an early issue.
I can send you one of the offsets if you need it but I'm hoping someone has the right one! |
|
| |
|
Joined:
December 2001
Posts: 7247
Location: The Great Pacific Northwest | edit:
These are extremely rare, but I do in fact have some. Please email me at mileskb at aol.com
FWIW, I believe these were used on only the very first run of Breadwinners.
Miles |
|
| |
|
Joined:
July 2002
Posts: 288
Location: Maine | PNR123 ... Sounds like you found a replacment through MR O.
I discovered today I have an incomplete "spare" set of that style tuner-peg body as well . Talbot |
|
| |
|
Joined:
June 2007
Posts: 3084
Location: Brisbane Australia | Hey Talbot,
You amaze me!!
Don't have an early B/W/Deacon output jackplate do you?
Through the body not pg.
AJ |
|
| |
|
Joined:
July 2002
Posts: 288
Location: Maine | Since I don't have that model guitar ,I need to see a picture to know.. All I recall is the body had a large hole in the lower cutout area, but what did it all connect to? |
|
| |
WTB tuner for 1st edition BREADWINNER