Strings on the bridge

Jukcat Posted 2006-08-08 3:37 PM (#244896) Subject: Strings on the bridge Joined: July 2006 Posts: 10 Location: Finland, Europe I've to do a new bridge to my Ovation 1612-1 Balladeer. Could somebody tell me how far the strings are from each other, on the original 1612-1 balladeer bridge? Please! Thank You very much! Jukcat Posted 2006-08-10 12:53 AM (#244897 - in reply to #244896) Subject: Re: Strings on the bridge Joined: July 2006 Posts: 10 Location: Finland, Europe Somebody please! Waskel Posted 2006-08-10 11:02 AM (#244898 - in reply to #244896) Subject: Re: Strings on the bridge Joined: February 2005 Posts: 11840 Location: closely held secret Can't someone help this poor Fin? Juk, PM fillhixx, he has one. MWoody Posted 2006-08-10 11:26 AM (#244899 - in reply to #244896) Subject: Re: Strings on the bridge Joined: December 2003 Posts: 13997 Location: Upper Left USA The 1112 and 1612 look like this and have a neck width of 1 11/16" I have a 1995 Collector Bridge I can send (nut width 1 11/16"). The shape is different but the span should be the same. I will take some measurements when I get home and convert to mm. Call Customer Service if possible too. TWA Posted 2006-08-10 12:04 PM (#244900 - in reply to #244896) Subject: Re: Strings on the bridge Joined: February 2005 Posts: 349 Location: Snellville, GA You removed the StringTubes? Nils Posted 2006-08-10 3:27 PM (#244901 - in reply to #244896) Subject: Re: Strings on the bridge Joined: March 2002 Posts: 1380 Location: Central Oregon Mine are 7/16" (11.5mm) center to center at the saddle on my 1612. Jukcat Posted 2006-08-11 3:48 PM (#244902 - in reply to #244896) Subject: Re: Strings on the bridge Joined: July 2006 Posts: 10 Location: Finland, Europe Thank You very much! Jukcat :)